Fire safety

By Anonymous -

From our friends at :Health and Safety Executive, UK

https://www.hse.gov.uk/toolbox/fire.htm 


Fire safety

Future building safety regulations

The government has asked HSE to establish a new building safety regulator in the wake of the Grenfell Tower disaster.

Find out more about the building safety regulator

Most fires are preventable. Those responsible for workplaces and other buildings to which the public have access can avoid them by taking responsibility for and adopting the right behaviours and procedures.

This section covers general advice on fire safety and also provides guidance on substances that cause fire and explosion.

General fire safety hazards

Fires need three things to start – a source of ignition (heat), a source of fuel (something that burns) and oxygen:

  • sources of ignition include heaters, lighting, naked flames, electrical equipment, smokers' materials (cigarettes, matches etc), and anything else that can get very hot or cause sparks
  • sources of fuel include wood, paper, plastic, rubber or foam, loose packaging materials, waste rubbish and furniture
  • sources of oxygen include the air around us

What do I have to do?

Employers (and/or building owners or occupiers) must carry out a fire safety risk assessment and keep it up to date. This shares the same approach as health and safety risk assessments and can be carried out either as part of an overall risk assessment or as a separate exercise.

Based on the findings of the assessment, employers need to ensure that adequate and appropriate fire safety measures are in place to minimise the risk of injury or loss of life in the event of a fire.

To help prevent fire in the workplace, your risk assessment should identify what could cause a fire to start, ie sources of ignition (heat or sparks) and substances that burn, and the people who may be at risk.

Once you have identified the risks, you can take appropriate action to control them. Consider whether you can avoid them altogether or, if this is not possible, how you can reduce the risks and manage them. Also consider how you will protect people if there is a fire.

  • Carry out a fire safety risk assessment
  • Keep sources of ignition and flammable substances apart
  • Avoid accidental fires, eg make sure heaters cannot be knocked over
  • Ensure good housekeeping at all times, eg avoid build-up of rubbish that could burn
  • Consider how to detect fires and how to warn people quickly if they start, eg installing smoke alarms and fire alarms or bells
  • Have the correct fire-fighting equipment for putting a fire out quickly
  • Keep fire exits and escape routes clearly marked and unobstructed at all times
  • Ensure your workers receive appropriate training on procedures they need to follow, including fire drills
  • Review and update your risk assessment regularly

Find out more

The law

The Regulatory Reform (Fire Safety) Order 2005 covers general fire safety in England and Wales.

In Scotland, requirements on general fire safety are covered in Part 3 of the Fire (Scotland) Act 2005, supported by the Fire Safety (Scotland) Regulations 2006.

In the majority of premises, local fire and rescue authorities are responsible for enforcing this fire safety legislation. HSE has enforcement responsibility on construction sites, for nuclear premises, and on ships under construction or undergoing repair.

Dangerous substances that cause fire and explosion

Work which involves the storage, use or creation of chemicals, vapours, dusts etc that can readily burn or explode is hazardous. Each year people are injured at work by flammable substances accidentally catching fire or exploding.   

This section does not cover explosives – our website has more detailed information on explosives and similar substances. It also has information on gas safety.

What are the hazards?

Many substances found in the workplace can cause fires or explosions. These range from the obvious, eg flammable chemicals, petrol, cellulose paint thinners and welding gases, to the less obvious – engine oil, grease, packaging materials, dusts from wood, flour and sugar.

It is important to be aware of the risks and to control or get rid of them to prevent accidents.

What do I have to do?

To help prevent accidental fires or explosions, you first need to identify:

  • what substances, materials, processes etc have the potential to cause such an event, ie substances that burn or can explode and what might set them alight
  • the people who may be at risk/harmed

Once you have identified the risks, you should consider what measures are needed to reduce or remove the risk of people being harmed. This will include measures to prevent these incidents happening in the first place, as well as precautions that will protect people from harm if there is a fire or explosion.

Key points to remember

  • Think about the risks of fire and explosions from the substances you use or create in your business and consider how you might remove or reduce the risks
  • Use supplier safety data sheets as a source of information about which substances might be flammable
  • Consider reducing the amount of flammable/explosive substances you store on site
  • Keep sources of ignition (eg naked flames, sparks) and substances that burn (eg vapour, dusts) apart
  • Get rid of flammable/explosive substances safely
  • Review your risk assessment regularly
  • Maintain good housekeeping, eg avoid build-up of rubbish, dust or grease that could start a fire or make one worse

You also need to consider the presence of dangerous substances that can result in fires or explosions as part of your fire safety risk assessment. This is required under the Regulatory Reform (Fire Safety) Order 2005 (in England and Wales) and under Part 3 of the Fire (Scotland) Act.

The Fire and Rescue Authorities deal with general fire safety matters in workplaces apart from on construction sites including shipbuilding where these are dealt with by HSE or its agents. Enforcement responsibility for fire safety where dangerous substances are kept and used generally lies with HSE (or local authorities if they inspect the premises).

Find out more

Guidance on flammable/explosive substances

The law

The Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR) require employers to assess the risk of fires and explosions arising from work activities involving dangerous substances, and to eliminate or reduce these risks.

Comments

Post a Comment

Popular posts from this blog

The Fire Triangle, Fire Tetrahedron and Dust Explosion Pentagon

By -
Image
Fire Triangle From Wikipedia, the free encyclopedia Jump to: navigation , search The fire triangle. The fire triangle or combustion triangle is a simple model for understanding the ingredients necessary for most fires . [1] It has been replaced in the fire fighting and protection industry partially by the fire tetrahedron (see below). The triangle illustrates a fire requires three elements: heat , fuel , and an oxidizing agent (usually oxygen ). The fire is prevented or extinguished by removing any one of them. A fire naturally occurs when the elements are combined in the right mixture. Without sufficient heat , a fire cannot begin, and it cannot continue. Heat can be removed by the application of a substance which reduces the amount of heat available to the fire reaction. This is often water, which requires heat for phase change from water to steam. Introducing sufficient quantities and types of powder or gas in the flame reduces the amount of heat available for t...
Read more

Are Spices Flammable?

By -
Image
Is Cinnamon Flammable? - Science - ChefSteps Made from the dried bark of Cinnamomum verum , a tree indigenous to Sri Lanka, cinnamon's exotic perfume and subtle flavor come from its two major components: cinnamaldehyde and eugenol. These two chemicals are volatile, meaning they readily vaporize at temperatures comfortable to humans, which is in fact why cinnamon is so fragrant. But those same vapors are also highly combustible (indeed, combustion only happens in the presence of vapors), making cinnamon a highly flammable material under the right conditions. Now a cloud of cinnamon dust isn’t the kind of thing most people would consider dangerous, but add enough heat and you’ll quickly have an expanding ball of fire known as a dust explosion. For dealing with this situation, we can only recommend a good pair of running shoes. In fact, the federal Occupational Safety and Health Administration issues warnings about cinnamon explosions in food manufacturing plants....
Read more

Functional Safety Audit vs. Functional Safety Assessment

By -
From Chemical Processing Don’t Confuse a Functional Safety Audit with a Functional Safety Assessment Understand the critical differences between the two essential evaluations By John Walkington, ABB Safety Lead Competency Centre Apr 19, 2017 Many people working in safety instrumented system (SIS) project development, execution, operation and maintenance treat a functional safety audit (FS Audit) and a functional safety assessment (FSA) as one and the same. So, based on this assumption, they simply ensure that such an activity is undertaken and perhaps signify the need to perform this evaluation at some point when it appears as a milestone on the project schedule. Moreover, often they call upon someone working on the project, who may or may not have had some previous experience in quality auditing, to deliver this audit/assessment. However, this is not a reasonable approach because the concepts for the audit and assessment markedly differ. An FS Audit provides...
Read more