Skip to main content

Managing Combustible Dust in Your Facility

By -

From our friends at SonicAire:

Four Ways to Manage Combustible Dust in Your Facility

Whether you’re in woodworking, plastics, or another manufacturing/processing industry, combustible dust is almost a given. Today’s compliance standards require you to do something about it as well. If you let combustible dust buildup in hard-to-reach spaces, you’d better hope an OSHA inspector doesn’t show up. NFPA 652 and other industry-specific standards make it clear that it’s your responsibility to stay in compliance. Otherwise, fines will be coming your way.

Standards do provide leniency in how you mitigate fugitive dust buildup in overhead and hard-to-reach spaces. The ideal solution for you may not make sense for someone else. Ultimately, you have to review the costs and risks associated and make the best decision possible.

Here are four common ways facilities manage combustible dust:

1 – Capture Dust at the Source

Depending upon your process and how you are generating dust, you may be able to capture some of it at the source. Dust collection systems are designed to pull dust out of the air and transport them to containers that employees must regularly change. According to David Ankenbrandt, CEO of Osprey Corporation, manufacturers should install filtration systems for each production line. These systems transport dust from the source to various collectors such as enclosed boxes, drums, bags, or bins, depending upon the type of dust and situation.

These systems can be more complicated to manage and require regular maintenance and upkeep. Depending upon how quickly your facility generates dust, managing the waste can be cumbersome. However, dust collection systems are preferable to dealing with fugitive dust’s repercussions whenever you are grinding, polishing, or cutting materials.

Inevitably though, these dust collection systems can only capture so much of the combustible dust. As we noted in a previous blog, in some facilities such as wood pellet manufacturing, even if you capture 99.99% of dry dust, it would still create more than 130 pounds of airborne dust each week. Even with the dust collection system, you’ll still need to manage dust in hard-to-reach spaces.

2a – Manually Clean as Needed

In the vast majority of manufacturing and processing facilities, the organization’s staff cleans fugitive dust manually from support beams, ductwork, and other spaces. The cost here can be extensive depending upon how many people are needed? and how much time it takes to complete the job. In addition to the labor, you might have to purchase or rent equipment to get the job done.

  • The height of the ceiling likely requires a scissor-lift.
  • Vacuums may be needed to gather large amounts of dust. (While it’s not an approved method, some companies use backpack blowers to remove built-up dust.)
  • They may also need brooms or vacuum systems to clean up the dust that ultimately settles on the floor.

None of this takes into account the most significant cost of all: lost production. Busy facilities lose money when the line shuts down. Essentially, if you’re not making something, you’re not making money. Shutting down operations to clean can be a costly endeavor.

Because of this, facilities will often delay housekeeping as much as possible and only schedule a shut down when it is way overdue to remove combustible dust buildup.

Unfortunately, this spot check approach may miss hard-to-see areas where dust is building up beyond compliance expectations. If you’re lucky, this never becomes a problem. All it takes is one visit from an inspector, though to make the cost of a shutdown seem trivial.

2b – Manually Clean on a Schedule

While the process doesn’t change, sometimes the scheduling does. When you’re able to schedule housekeeping at regular intervals, it minimizes the risk of an explosive dust event and makes it easier to clean. Over time, it could reduce the overall cost of cleanings as staff becomes aware of what it takes to get the job done. If completed frequently enough, it may be worth investing in cleaning equipment to get the job done faster without paying a premium to rent.

3 – Hire a Third-Party for Housekeeping

Some facilities prefer to have an expert handle the housekeeping. When you choose this route, there are pros and cons. First of all, they come with equipment in hand and know what needs to be done. Because of this, they usually take less time to complete the job, meaning you don’t have to shut down for as long. Or, if you’re able to sync it with equipment maintenance, they may be able to complete the work without any additional downtime.

All told, the route will be more expensive than a DIY approach. Instead of handling it with existing staff, you’re paying the overhead for another company. At the same time, knowing they did the job right without risking any of your team may be a benefit. In some locations, there may be spaces 60-80′ off the floor. Getting to these spots is not just tricky, it’s dangerous. By hiring someone else to come in and take care of it, you are limiting your employees’ exposure to risk. Plus, you’ll have someone to call if OSHA comes to visit and there are any issues .

4 – Prevent Dust-Buildup

Of course, the best way to manage combustible dust is to avoid cleaning those hard-to-reach spaces altogether. Instead of letting combustible dust settle on beams and air ducts, prevent dust buildup and save yourself the expense and hassle.

That’s precisely what dust control fans were designed to do. They automatically operate day and night, creating an air barrier that prevents fugitive dust from rising into the ceiling and settling there.

If it doesn’t buildup in overhead spaces, you don’t have to clean it.

Dust settles to the ground, where it can be easily swept and captured during standard cleaning procedures. The benefit of this option is the time and cost savings. You don’t have to shut down to clean. Your staff doesn’t have to ride a lift into the ceiling to clean off the dust.

Provided they are installed and operated according to the manufacturers’ instructions, there shouldn’t be any need for significant housekeeping in these areas.

 

Contact SonicAire:

Phone : (336) 712-2437

Email : moreinfo@sonicaire.com

Comments

Post a Comment

Popular posts from this blog

The Fire Triangle, Fire Tetrahedron and Dust Explosion Pentagon

By -
Image
Fire Triangle From Wikipedia, the free encyclopedia Jump to: navigation , search The fire triangle. The fire triangle or combustion triangle is a simple model for understanding the ingredients necessary for most fires . [1] It has been replaced in the fire fighting and protection industry partially by the fire tetrahedron (see below). The triangle illustrates a fire requires three elements: heat , fuel , and an oxidizing agent (usually oxygen ). The fire is prevented or extinguished by removing any one of them. A fire naturally occurs when the elements are combined in the right mixture. Without sufficient heat , a fire cannot begin, and it cannot continue. Heat can be removed by the application of a substance which reduces the amount of heat available to the fire reaction. This is often water, which requires heat for phase change from water to steam. Introducing sufficient quantities and types of powder or gas in the flame reduces the amount of heat available for t...
Read more

Are Spices Flammable?

By -
Image
Is Cinnamon Flammable? - Science - ChefSteps Made from the dried bark of Cinnamomum verum , a tree indigenous to Sri Lanka, cinnamon's exotic perfume and subtle flavor come from its two major components: cinnamaldehyde and eugenol. These two chemicals are volatile, meaning they readily vaporize at temperatures comfortable to humans, which is in fact why cinnamon is so fragrant. But those same vapors are also highly combustible (indeed, combustion only happens in the presence of vapors), making cinnamon a highly flammable material under the right conditions. Now a cloud of cinnamon dust isn’t the kind of thing most people would consider dangerous, but add enough heat and you’ll quickly have an expanding ball of fire known as a dust explosion. For dealing with this situation, we can only recommend a good pair of running shoes. In fact, the federal Occupational Safety and Health Administration issues warnings about cinnamon explosions in food manufacturing plants....
Read more

Functional Safety Audit vs. Functional Safety Assessment

By -
From Chemical Processing Don’t Confuse a Functional Safety Audit with a Functional Safety Assessment Understand the critical differences between the two essential evaluations By John Walkington, ABB Safety Lead Competency Centre Apr 19, 2017 Many people working in safety instrumented system (SIS) project development, execution, operation and maintenance treat a functional safety audit (FS Audit) and a functional safety assessment (FSA) as one and the same. So, based on this assumption, they simply ensure that such an activity is undertaken and perhaps signify the need to perform this evaluation at some point when it appears as a milestone on the project schedule. Moreover, often they call upon someone working on the project, who may or may not have had some previous experience in quality auditing, to deliver this audit/assessment. However, this is not a reasonable approach because the concepts for the audit and assessment markedly differ. An FS Audit provides...
Read more